Thank you for visiting nature.com. You are using a browser version with limited support for CSS. To obtain the best experience, we recommend you use a more up to date browser (or turn off compatibility mode in Internet Explorer). In the meantime, to ensure continued support, we are displaying the site without styles and JavaScript.
Nature Communications volume 13, Article number: 2597 (2022 ) Cite this article Alumina Adsorbent
The interfacial sites of metal-support interface have been considered to be limited to the atomic region of metal/support perimeter, despite their high importance in catalysis. By using single-crystal surface and nanocrystal as model catalysts, we now demonstrate that the overgrowth of atomic-thick Cu2O on metal readily creates a two-dimensional (2D) microporous interface with Pd to enhance the hydrogenation catalysis. With the hydrogenation confined within the 2D Cu2O/Pd interface, the catalyst exhibits outstanding activity and selectivity in the semi-hydrogenation of alkynes. Alloying Cu(0) with Pd under the overlayer is the major contributor to the enhanced activity due to the electronic modulation to weaken the H adsorption. Moreover, the boundary or defective sites on the Cu2O overlayer can be passivated by terminal alkynes, reinforcing the chemical stability of Cu2O and thus the catalytic stability toward hydrogenation. The deep understanding allows us to extend the interfacial sites far beyond the metal/support perimeter and provide new vectors for catalyst optimization through 2D interface interaction.
Lizhi Jiang, Kunlong Liu, … Nanfeng Zheng
Wugen Huang, Qingfei Liu, … Fan Yang
Huishan Shang, Xiangyi Zhou, … Yadong Li
Supported metal catalysts are an important category of heterogeneous catalysts that are widely applied in the chemical industry1,2,3,4. When catalytic metal species are deposited onto supports or decorated by supports, a two-dimensional (2D) metal-support interface is naturally formed5,6,7,8,9. It has been well demonstrated that the interface can effectively modulate the adsorption behavior of reactants, intermediates, or products on the different chemical components of the interface, thus providing the opportunity to break the linear scaling relationship for enhancing the catalytic performance10,11,12. In most cases, oxide supports with dense structures have no accessible porosity by small molecules so the catalytically active sites have to be limited to the atomic region of 1D metal/support perimeter13,14,15,16. Under such a situation, it is very unfavorable for the design of supported catalysts with optimized usage of noble metals. It is hence highly desirable to explore the feasibility of applying porous oxide supports to extend the catalytic interfacial sites beyond the metal/support boundary.
We now demonstrate the in situ formation of atomic-thick microporous 2D Cu2O overlayer on PdCu alloy to achieve an unprecedentedly simultaneous improvement in activity, selectivity, and stability in catalytic hydrogenation. In this work, high-surface nanosheets (NSs) and single-crystal surfaces with PdCu alloy covered by an atomic-thick microporous Cu2O overlayer were fabricated and applied as model catalysts to reveal the formation and excellent catalytic performance of 2D Cu2O/Pd catalytic interface. Comprehensive studies demonstrate that the atomic-thick 2D Cu2O overlayer allows the access of H2 onto the PdCu alloy underneath, which supplies activated H species for hydrogenation occurring on the 2D Cu2O/Pd catalytic interface. In addition, the PdCu alloy underneath the Cu2O overlayer creates a favorable electronic structure for enhancing catalytic hydrogenation. More importantly, the reaction of terminal alkynes with the boundary or defective sites of the Cu2O overlayer would build up its robustness against H2 reduction during hydrogenation. The deep understanding allows us to prepare practical catalysts with remarkable performance enhancement in the activity, selectivity and stability toward the semi-hydrogenation of a wide range of alkynes under mild conditions.
The 2D Cu2O monolayer has a microporous framework with pore opening of ~5.5 Å, which can restrict the passage of medium-sized molecules17. More importantly, the formation of 2D microporous Cu2O overlayer on single-crystal surface of noble metal has been well documented in the literature18,19,20. Experimentally, to create Pd catalysts with 2D microporous Cu2O overlayer, Pd@Cu core-shell NSs were first prepared by depositing Cu on the premade Pd NSs with a thickness ~5-atomic layer (Fig. 1a and Supplementary Fig. 1) via a hydride-induced-reduction strategy21,22. The as-prepared Pd@Cu NSs were then exposed in air at 30 °C for 48 h to prepare the PdCu@Cu2O core-shell NSs23,24. As revealed by transmission electron microscopy (TEM), the hexagonal shape of Pd NSs was deformed after the Cu deposition (Fig. 1b and Supplementary Fig. 2). High-angle annular dark-field scanning transmission electron microscopy (HAADF) and energy-dispersive X-ray elemental mapping (EDS) of PdCu@Cu2O with Cu/Pd molar ratio of 1 revealed that the growth of Cu was rather uniform on the Pd surface (Fig. 1c and Supplementary Fig. 3). However, the exposure of a small portion of Pd was still revealed by the cyclic voltammetry (CV) (Supplementary Fig. 4).
a Representative TEM images of Pd NSs. b High-resolution high-angle annular dark-field (HAADF) STEM image of PdCu@Cu2O (Cu/Pd=1). c STEM-EDS elemental mapping of PdCu@Cu2O (Cu/Pd=1). d The first derivatives of Cu K-edge XANES of PdCu@Cu2O with different Cu/Pd ratio and references. e Catalytic performance of semi-hydrogenation of PhC≡CH on PdCu@Cu2O with different Cu/Pd ratios. Reaction conditions: 10 mL ethanol; 2 μmol Pd; 4 mmol PhC≡CH (1:2,000); T = 303 K; H2 pressure = 0.1 MPa (PhC≡CH was introduced before H2).
A series of PdCu@Cu2O catalysts with different Cu/Pd ratios were prepared and characterized by X-ray absorption spectroscopy (XAS) and X-ray photoelectron spectroscopy (XPS) to investigate the coordination environment and electronic structure of Pd and Cu. In comparison with Pd foil and Pd NSs, the Pd K-edge white line of PdCu@Cu2O showed a small shift to lower energy for the absorption edge (E0) (Supplementary Fig. 5a, b and Supplementary Table 1). The shift increased with the increased content of Cu, suggesting that Pd in PdCu@Cu2O was slightly negatively charged with the electron transfer from Cu to Pd. To make the feature of Cu in the samples more evident, the Cu K-edge XANES spectra were subjected to the first derivation25,26,27. As illustrated in Fig. 1d and Supplementary Fig. 5c, the Pd@Cu samples with Cu/Pd ≥ 0.5 displayed two distinct peaks assigned to Cu0 and Cu+, indicating the coexistence of Cu and Cu2O, which was further confirmed by XPS analysis of the Pd@Cu sample with Cu/Pd = 1 (Supplementary Fig. 6 and Supplementary Table 2)28,29,30. In comparison, PdCu@Cu2O with Cu/Pd < 0.5 only displayed a peak assigned to Cu0, indicating the presence of only metallic Cu in the form of PdCu alloy.
The semi-hydrogenation of alkynes was chosen as a model reaction to evaluate the catalytic performance of Pd@Cu with different contents of Cu0 and Cu+31,32. As shown in Fig. 1e and Supplementary Fig. 7, the catalytic activity and selectivity of PdCu@Cu2O in the hydrogenation of phenylacetylene (PhC≡CH) were closely related to the Cu/Pd ratio. It has been well documented that when Pd alloys with Cu, the surface-active Pd sites would be diluted into small domains such that the selectivity can be enhanced often with the suppressed activity33,34,35. As expected, the selectivity toward styrene did increase with the increasing Cu/Pd ratio. Especially, when Cu/Pd ratio was higher than 0.5, all the Pd@Cu catalysts exhibited high selectivity of over 96% to styrene (Fig. 1e and Supplementary Fig. 7). It is worth noting that the catalytic activity increased first and then dropped with the Cu/Pd ratio varying from 0 to 1.5. The optimal ratio of Cu/Pd to achieve the best activity was 1:1 where the total conversion of PhC≡CH was achieved within 80 min at the catalyst/substrate molar ratio of 1:2000. It should be noted that the catalytic performance of the PdCu@Cu2O (Cu/Pd = 1:1) catalyst was far superior to that of the commercial Lindlar catalyst (Supplementary Fig. 8). Moreover, the catalyst exhibited outstanding stability in the semi-hydrogenation of PhC≡CH. No significant decay in both selectivity and activity was observed even after the catalyst was recycled six times under the same conditions (Supplementary Fig. 9a). In contrast, the catalytic activity of Pd NSs without Cu deposition was gradually decreased in six catalytic cycles (Supplementary Fig. 9b). However, to our big surprise, different from the catalysts collected from the hydrogenation reaction of PhC≡CH, the fresh PdCu@Cu2O catalyst exhibited a decent hydrogenation activity in the hydrogenation of styrene (Supplementary Fig. 10), indicating that the interaction of PhC≡CH with PdCu@Cu2O would inhibit the adsorption and hydrogenation of styrene. All these findings suggested that the as-formed catalytically active structure in the hydrogenation of alkynes should be beyond simple PdCu alloy.
To understand how the catalytically active structure evolved from the Pd NSs, scanning tunneling microscope (STM) analysis was employed to follow the reaction procedures starting from a single-crystal Pd(111) surface. As shown in Supplementary Fig. 11, when Cu was deposited on Pd(111) with coverage of less than one monolayer (i.e., ~0.96 ML), herringbone dislocation lines were observed on the surface, which is similar to the growth of Co or Fe thin films on Pt(111)36,37. According to density functional theory (DFT) calculations, the deposited Cu atoms with relatively low Cu/Pd ratio preferred to sink into the subsurface (Supplementary Figs. 12 and 13 and Supplementary Table 3), well consistent with the reported theoretical work that Pd on Cu/Pd (1:1) bimetallic alloy was enriched on the outermost layer while Cu was enriched on the second layer38. Experimentally, the oxide reduction peak of Cu+ in CV was not observed when the deposited Cu/Pd ratio ≤ 0.4 (Supplementary Fig. 14), also indicating the formation of Pd skin in the sample with a low Cu/Pd ratio. However, once the deposited Cu was more than one monolayer, the Cu-on-Pd core-shell structure would be formed (Supplementary Fig. 15), which was further confirmed by the high-sensitivity low energy ion scattering spectra and DFT analysis (Supplementary Figs. 16–18 and Supplementary Table 3). Furthermore, STM results confirmed that, when exposed to O2, the Cu overlayer on the PdCu surface was easily oxidized to Cu2O (Fig. 2a and Supplementary Fig. 19)24,39. Hence, two kinds of Cu would coexist in the oxidized Pd@Cu samples with the deposition of Cu over one monolayer. While the Cu underneath the Pd surface preferred to keep the metallic state, the surface Cu would be oxidized into +1, well explaining the Cu+ signal in the XAS spectra (Fig. 2b and Supplementary Figs. 20 and 21).
a STM images of PdCu@Cu2O with >1.0 ML Cu. b DFT-optimized structures of PdCu@Cu2O. c The difference in catalytic performance of PdCu@Cu2O (Cu/Pd =1) nanosheets caused by the feeding sequence. d Exposure of PdCu@Cu2O (~1.0 ML Cu2O) with defects to 1.0 × 10−6 mbar H2 at 300 K. e PhC≡CH adsorption on surface of PdCu@Cu2O (~1.0 ML Cu2O). f Exposure PdCu@Cu2O (~1.0 ML Cu2O) with adsorbed PhC≡CH to 1.0 × 10−6 mbar H2 at 300 K. Reaction conditions: 10 mL ethanol; 2 μmol Pd; 4 mmol PhC≡CH; 303 K; 0.1 MPa H2. Scanning parameters: a Vs = −0.1 V, I = 1.0 nA; d Vs = −0.2 V, I = 0.5 nA. e Vs = −1.0 V, I = 0.1 nA; f Vs = 1.0 V, I = 0.1 nA.
Due to their lattice mismatch, the growth of defective oxide overlayer on metal substrate has been commonly observed19,40. The rich boundary or defect sites thereon are often proposed to be catalytically active sites. As revealed by STM, when Cu2O was deposited on Pd(111), rich nanoscale defects were still observed on the oxide overlayer (Supplementary Fig. 19). It was thus reasonable to hypothesize that the boundary between Pd and defective Cu2O might act as active sites for the semi-hydrogenation of PhC≡CH. However, the hypothesis was disproved by the observation that the PdCu@Cu2O pretreated by H2 displayed a dramatically reduced selectivity toward styrene in the hydrogenation of PhC≡CH. As shown in Fig. 2c and Supplementary Fig. 22, when the conversion of PhC≡CH reached 100%, the selectivity toward styrene was only 76.6% over the H2-pretreated PdCu@Cu2O NSs. The STM analysis revealed that the defective Cu2O on PdCu@Cu2O was easily reduced to Cu once it was exposed to H2 at room temperature (Fig. 2d and Supplementary Fig. 23). However, when PhC≡CH was introduced before H2 treatment, no reduction of defective Cu2O on PdCu@Cu2O was observed in 1.0 × 10−6 mbar H2 (Fig. 2e, f and Supplementary Figs. 24 and 25), clearly indicating the reduction of Cu2O was suppressed by the pretreatment of PhC≡CH. More importantly, once PhC≡CH was introduced to treat the PdCu@Cu2O (Cu/Pd ≥ 0.5) surface before H2 feeding, the as-treated surface showed negligible activity for the hydrogenation of styrene (Supplementary Fig. 26). All these results clearly demonstrated that the outstanding selectivity of PdCu@Cu2O toward styrene in the semi-hydrogenation of PhC≡CH should be attributed to the presence of Cu2O overlayer on PdCu. The reaction of PhC≡CH at the defective sites of Cu2O helped to create its robustness against H2 reduction during hydrogenation.
To further verify our speculation, in situ Fourier transform infrared spectroscopy (in situ FT-IR) and Raman spectroscopy was performed to monitor the hydrogenation process catalyzed by the PdCu@Cu2O catalyst prepared from Pd NSs. As shown in Fig. 3a and Supplementary Fig. 27, while the signal of terminal C–H of PhC≡CH disappeared when H2 treatment was introduced, the signal of the alkynyl-copper (Cu(I)-C≡CPh) complex component still existed even after 80-min H2 treatment, indicating that the alkynyl group originated from the dissociative adsorption of PhC≡CH should be inert during the hydrogenation41,42,43. In situ temperature-programmed desorption–mass spectrometry (in situ TPD-MS) further confirmed that new species left on the used PdCu@Cu2O catalyst were associated with deprotonated PhC≡C− species (Supplementary Figs. 28–31). DFT calculations demonstrated that PhC≡CH preferred to be adsorbed in a dissociative mode by forming the Cu(I)-C≡CPh structure at the defective sites of PdCu@Cu2O (Supplementary Figs. 32–34). More importantly, the formation of Cu(I)-C≡CPh structure was able to effectively passivate the defective sites. DFT calculation results indicated that the surface Cu2O overlayer with defects would be easily reduced by H2 through a two-step reaction by overcoming a small barrier of 0.47 eV and 0.60 eV so that the whole Cu2O overlayer could be quickly reduced with the “domino effect” (Supplementary Fig. 35). Our experiments did confirm that when there were no Cu(I)-C≡CPh motifs on the boundary, the surface Cu2O of the fresh PdCu@Cu2O catalyst would be easily reduced into metallic Cu by H2 at 30 °C (Supplementary Fig. 36a, b). DFT calculations also revealed that the reduced Cu/Pd interface exhibited poor selectivity for the semi-hydrogenation of PhC≡CH due to the high hydrogenation activity for styrene (Fig. 3b, c and Supplementary Fig. 37), nicely explaining the catalysis results over the H2-pretreated PdCu@Cu2O catalyst. In contrast, the reduction of Cu2O overlayer by H2 was dramatically suppressed after the defective sites were “locked” by Cu(I)-C≡CPh groups as the removal of interfacial oxygen by H atom had to overcome a much high barrier of 1.85 eV (Supplementary Fig. 35). In addition, Cu(I)-C≡CPh motif would be stable upon hydrogenation due to a high barrier of 1.0 eV to be overcome (Supplementary Fig. 38), echoing the XPS measurements (Supplementary Fig. 36a, c).
a Monitoring the catalytic hydrogenation of PhC≡CH on PdCu@Cu2O using in situ FT-IR spectroscopy. b Predicted barriers of stepwise hydrogenation of PhC≡CH on the reduced PdCu alloy and PdCu@Cu2O surface. c DFT-optimized structures of reduced PdCu alloy and defected PdCu@Cu2O with dissociated PhC≡C− bound on defect sites. d Energy profile of PhC≡CH stepwise hydrogenation on PdCu@Cu2O surface protected by PhC≡CH from DFT calculations.
All the above results clearly illustrated that PhC≡CH served as an unprecedented modifier for stabilizing catalytically active and selective sites for the semi-hydrogenation of alkynes. The selective semi-hydrogenation reactions should then take place over 2D Cu2O/Pd interface. DFT calculations were further performed to explore the molecular mechanism of semi-hydrogenation of PhC≡CH. The calculation results illustrated that H2 would easily pass through the six-membered ring of the Cu2O overlayer to be dissociated on the underneath Pd sites with an energy barrier of ~0.58 eV (Supplementary Fig. 39). The activated H atoms then migrated onto the O species at the Cu2O and PdCu interface (Supplementary Fig. 40). Interestingly, the H atoms located on O-Cu(I) sites would not participate the hydrogenation, which was confirmed by nuclear magnetic resonance, in situ FT-IR, and isotope effect studies (Supplementary Figs. 41–44). The DFT calculations showed that the Cu2O overlayer was involved in the semi-hydrogenation of PhC≡CH, and the electronic modulation by the PdCu alloy below Cu2O overlayer would weaken the adsorption energy of H atoms, thus enhancing the subsequent hydrogenation (Fig. 3d and Supplementary Figs. 45–47, and Supplementary Table 4). The reaction barriers for the first and second H additions were calculated to 0.67 eV and 0.66 eV, respectively, lower than that of rate-determining step (TS1) over clean Pd(111) (0.84 eV) and Pd@Cu2O (1.18 eV), explaining why the introduction of Cu helped enhance the hydrogenation activity of Pd. While the barriers of the following H addition step of styrene over 2D Cu2O/Pd interface was 1.22 eV, much higher than the desorption energy of styrene (0.26 eV), accounting for the high selectivity of the catalyst towards styrene. On the contrary, over Pd(111), the desorption energy of styrene was higher than the barriers of hydrogenation (1.36 eV vs 0.92 eV, Supplementary Fig. 46), also consistent with the experimentally observed poor selectivity on unmodified Pd catalyst. The important role of surface microporous Cu2O overlayer in the semi-hydrogenation of PhC≡CH was also confirmed by the catalytic performance depending on the alkyne size and the C≡C position (Supplementary Fig. 48).
With the understanding of how to create 2D Cu2O/Pd interface with enhanced activity, selectivity, and stability, we applied the demonstrated concept to fabricate practical Pd catalysts for the semi-hydrogenation of a wide range of alkyne compounds. Following the protocol to grow Cu2O overlayer on Pd NSs, an easily prepared Pd catalyst was made by reductive deposition of Cu on a Pd/C catalyst followed by air oxidation and pretreating with PhC≡CH (Supplementary Fig. 49). The performance of the as-prepared catalyst was evaluated for the semi-hydrogenation of a variety of alkynes (i.e. 4-tert-butylphenylacetylene, 4-ethynylanisole, 1-otyne, 3-hexyn-1-olcas, 1-phenyl-1-propyne, diphenylacetylene, 2-ethynyltoluene, and 2-ethynylanisole) which contain either terminal or internal C≡C groups. Compared with the untreated Pd/C, the modified catalyst did enhance both the activity and selectivity toward the alkene products (Table 1, entries 1–8, and Supplementary Figs. 50–53).
The selectivity to alkenes at 100% conversion was 96.3%, 95.4%, 95.1%, 95.7%, 96.0%, 95.2%, 94.8%, and 95.7% for 4-tert-butylstyrene, 4-methoxystyrene, 1-octene, cis-3-hexen-1-ol, cis-β-methylstyrene, stilbene, 2-vinyltoluene, and 1-ethenyl-2-methoxybenzene, respectively. In comparison, the unmodified Pd/C gave relatively poor selectivity of 85.4%, 84.4%, 71.9%, 74.5%, 86.9%, 76.7%, 58.5%, and 87.2%, respectively, under the same reaction conditions. Moreover, the modified catalyst also exhibited excellent catalytic performance in the hydrogenation of polar unsaturated compounds, such as 4-ethynylbenzaldehyde and 4-nitrophenylacetylene (Table 1, entries 9–10, and Supplementary Fig. 54). The deep understanding allows us to extend the interfacial catalytic sites far beyond the classical metal/support perimeter for fabricating practical catalysts for the semi-hydrogenation of a wide range of alkynes under mild conditions.
In summary, the overgrowth of atomic-thick porous Cu2O on Pd created an unprecedented 2D metal-support interface with remarkable performance enhancement towards the semi-hydrogenation of alkynes, far beyond the classical 1D metal/support perimeter. The comprehensive studies in this work have unexpectedly demonstrated three different roles of Cu in enhancing the catalysis of Pd: (1) The overgrowth of an atomic overlayer of 2D microporous Cu2O on Pd is the key to enhancing the selectivity toward semi-hydrogenation due to the formation of 2D Cu2O/Pd catalytic interface. (2) The alloy of Cu(0) with Pd is the main contributor to the enhanced activity due to the electronic modulation. (3) The formation of Cu(I)-alkyne complex via the easy reaction of the defective Cu2O overlayer with terminal alkynes reinforces the robustness of the microporous Cu2O overlayer on the catalyst surface, thus enhancing the stability of the catalytic interface against reduction during hydrogenation catalysis. The deep understanding of 2D metal-oxide interface not only enriched our knowledge and understanding of metal-support interaction but also provided a new direction to modulate the catalysis by encapsulating the active metals with porous 2D materials.
Pd(acac)2 (50 mg), polyvinylpyrrolidone (160 mg), and tetrabutylammonium bromide (160 mg) were mixed with N,N-dimethylformamide (10 mL) and water (2 mL) in a glass pressure vessel. After being charged with CO to 1 bar, the vessel was heated from 30 °C to 60 °C for 30 min and kept at this temperature for 150 min with stirring. The resulting blue colloidal products were collected by centrifugation, and washed several times with ethanol and acetone for further use. For Pd@Cu core-shell NSs22, the as-prepared Pd NSs were used as seeds and dispersed in 5 ml water in a 25 ml two-necked flask. The flask was heated at 60 °C, along with H2 gas was continuously bubbled through the solution. After the system was kept at 60 °C for 40 min, the H2 gas was moved away and the system remained to be closed. Some Cu(NO3)2 solution was injected by an injector under stirring. The ratio of Cu/Pd was varied from 0.25, 0.5, 0.75, 1, 1.25, 1.5, 2, and 3. The system was kept closed at 60 °C for 1 h. Then, the reaction was stopped by venting the system. To obtain PdCu@Cu2O NSs, the as-prepared Pd@Cu catalysts were exposed to the air at 30 °C for 48 h.
The catalyst (Pd NSs, PdCu@Cu2O, and Lindlar catalyst) was first dispersed in ethanol. A certain amount of dispersion was taken for the catalytic reaction, depending on the amount of catalyst needed. Typically, for PhC≡CH (or styrene) hydrogenation with a ratio of 1:2000 (Pd/PhC≡CH), 2 μmol Pd was used. The catalyst was dispersed in 10 ml ethanol in a glass pressure vessel and sonicated for 5 min, and then mixed with 4 mmol PhC≡CH under magnetic stirring. The vessel was then charged constantly with H2 and kept at 30°C in a water bath during stirring. The conversion and selectivity were characterized for the desired time period by extracting 100 μl solution for gas chromatographic analysis. For Cu nanocrystals, the same amount of Cu was also dispersed in ethanol for catalysis. The reaction conditions were kept the same as those for PdCu@Cu2O. For the hydrogenation of other alkynes by the three (Pd/C, PdCu@Cu2O-C≡CPh/C, or PdCu@Cu2O/C) catalysts, the reaction condition was similar to that of PhC≡CH hydrogenation, but 4 mmol of other alkynes was used for the reaction. As a comparison, the catalysts were exposed to 1 bar H2 for 30 min before PhC≡CH was introduced and the PhC≡CH hydrogenation reaction conditions were the same as above.
STM experiments were conducted in combined ultrahigh vacuum equipment consisting of a low-temperature STM chamber (LT-STM CreaTec) and a preparation chamber. LT-STM images were acquired at 78 K with a chemically etched W tip. All images were processed with SPIP software. Pd(111) single-crystal (Mateck) were cleaned by cycles of Ar+ bombardment and annealing under UHV condition at 950 K, until no surface contaminant was detected by STM. PdCu surface alloy was constructed by evaporating >1.0 ML (monolayer) Cu on Pd(111) surface at 300 K, followed by annealing at 400 K for 10 min. Cuprous oxide was prepared by depositing Cu on Pd(111) or CuPd/Pd(111) surface in 1.0 × 10−7 mbar O2 at cryogenic temperature (~150 K) and then annealed at 400 K in oxygen atmosphere. PhC≡CH was purified by freeze-pump-thaw cycles, and introduced onto the sample surface through a leak valve at 300 K.
All calculations were carried out by using the spin-polarized DFT embedding in the Vienna Ab Initio Simulation Package44,45,46,47. DFT + U with Perdew–Burke–Ernzerhof48 exchange-correlation was employed. An U-J value of 6 eV for the Cu 3d states was applied, which has been used previously to investigate the Cu2O49. The valence electrons were treated by plane-wave basis sets with a cutoff energy of 400 eV, while the core electrons were described by projector augmented-wave pseudopotentials. The Monkhorst-Pack scheme was used to generate a k-point grid in the Brillouin zone, and the 3 × 3 × 1 k-point grid was adopted for all calculations. The transition states were obtained by nudged elastic band method. And then the quasi-Newton algorithm was applied to refine the final transition state (TS) structures. For the geometric optimization, the forces of each ion were <0.03 eV/Å.
To simulate the PdCu@Cu2O, Cu12O8 superstructure was place on a four-layer (4 × 4) Pd(111) slab with whole subsurface atoms displaced by Cu atoms, see Supplementary Fig. 20. During the optimization, the upper three layers (including the Cu12O8 layer) were allowed to be relaxed and the bottom two layers of Pd were frozen50.
The adsorption energy ΔEads was defined as,
where Eads/surf represented the total energy of the catalyst and the adsorbed reactant molecules, Eads the energy of the reactant molecules, and Esurf the energy of the clean surface of the catalyst.
The calculated surface energy (ΔEsurf) of as-built model, was defined as,
where EPdCu, EPd, and ECu denoted the energy of the PdCu alloys, the energy of one Pd atom in the bulk, and the energy of one Cu atom in the bulk, respectively. Here, m and n represented the number of Pd (or Cu) atoms in the alloy, respectively. The slab was treated with both of the exposing surfaces relaxed, and A is the area of one surface considered.
The data that support the findings of this study are available from the corresponding author upon reasonable request. Source data are provided in this paper.
Zhang, L. et al. Selective hydrogenation over supported metal catalysts: from nanoparticles to single atoms. Chem. Rev. 120, 683–733 (2020).
Article CAS PubMed Google Scholar
Liu, K. et al. Insights into the interfacial effects in heterogeneous metal nanocatalysts toward selective hydrogenation. J. Am. Chem. Soc. 143, 4483–4499 (2021).
Article CAS PubMed Google Scholar
Tauster, S. J. Strong metal-support interactions. Acc. Chem. Res. 20, 389–394 (1987).
Zhou, W. T. et al. Non-contact biomimetic mechanism for selective hydrogenation of nitroaromatics on heterogeneous metal nanocatalysts. Sci. China Chem. 65, 726–732 (2022).
Farmer, J. A. & Campbell, C. T. Ceria maintains smaller metal catalyst particles by strong metal-support bonding. Science 329, 933–936 (2010).
Article ADS CAS PubMed Google Scholar
Fu, Q. et al. Interface-confined oxide nanostructures for catalytic oxidation reactions. Acc. Chem. Res. 46, 1692–1701 (2013).
Article CAS PubMed Google Scholar
Mitchell, S. et al. Nanoscale engineering of catalytic materials for sustainable technologies. Nat. Nanotechnol. 16, 129–139 (2021).
Article ADS CAS PubMed Google Scholar
Shaikhutdinov, S. & Freund, H. J. Ultrathin oxide films on metal supports: structure-reactivity relations. Annu. Rev. Phys. Chem. 63, 619–633 (2012).
Article ADS CAS PubMed Google Scholar
Lewandowski, M. et al. Scanning tunneling microscopy evidence for the Mars-van Krevelen type mechanism of low temperature CO oxidation on an FeO(111) film on Pt(111). Catal. Today 181, 52–55 (2012).
Qin, R. et al. Surface coordination chemistry of atomically dispersed metal catalysts. Chem. Rev. 120, 11810–11899 (2020).
Article CAS PubMed Google Scholar
van Deelen, T. W. et al. Control of metal-support Interactions in heterogeneous catalysts to enhance activity and selectivity. Nat. Catal. 2, 955–970 (2019).
Hu, C. Y., Chen, R. H. & Zheng, N. F. Chemical insights into interfacial effects in inorganic nanomaterials. Adv. Mater. 33, 2006159 (2021).
Chen, G. X. et al. Interfacial effects in iron-nickel hydroxide-platinum nanoparticles enhance catalytic oxidation. Science 344, 495–499 (2014).
Article ADS CAS PubMed Google Scholar
Fu, Q. et al. Interface-confined ferrous centers for catalytic oxidation. Science 328, 1141–1144 (2010).
Article ADS CAS PubMed Google Scholar
Xu, C. et al. Interfacing with silica boosts the catalysis of copper. Nat. Commun. 9, 3367 (2018).
Article ADS PubMed PubMed Central CAS Google Scholar
Liu, N. et al. Auδ- Ov-Ti3+ interfacial site: catalytic active center toward low-temperature water gas shift reaction. ACS Catal. 9, 2707–2717 (2019).
Yang, F. et al. Identification of 5-7 defects in a copper oxide surface. J. Am. Chem. Soc. 133, 11474–11477 (2011).
Article CAS PubMed Google Scholar
Huang, W. et al. Tuning the activities of cuprous oxide nanostructures via the oxide-metal interaction. Nat. Commun. 11, 2312 (2020).
Article ADS CAS PubMed PubMed Central Google Scholar
Zhao, G. et al. Metal/oxide interfacial effects on the selective oxidation of primary alcohols. Nat. Commun. 8, 14039 (2017).
Article ADS PubMed PubMed Central CAS Google Scholar
Liu, Q. et al. Tuning the structures of two-dimensional cuprous oxide confined on Au(111). Nano Res. 11, 5957–5967 (2018).
Huang, X. et al. Freestanding palladium nanosheets with plasmonic and catalytic properties. Nat. Nanotechnol. 6, 28–32 (2011).
Article ADS CAS PubMed Google Scholar
Wang, X. et al. A hydride-induced-reduction strategy for fabricating palladium-based core-shell bimetallic nanocrystals. Nanoscale 6, 6798–6804 (2014).
Article ADS CAS PubMed Google Scholar
Zhu, X. et al. Compressive surface strained atomic-layer Cu2O on Cu@Ag nanoparticles. Nano Res. 12, 1187–1192 (2019).
Yang, F. et al. Autocatalytic reduction of a Cu2O/Cu(111) surface by CO: STM, XPS, and DFT studies. J. Phys. Chem. C. 114, 17042–17050 (2010).
Yuan, L. et al.Dynamic evolution of atomically dispersed Cu species for CO2 photoreduction to solar fuels.ACS Catalog.9, 4824–4833 (2019).
Caballero, A. et al. An in situ XAS study of Cu/ZrO catalysts under de-NOx reaction conditions. J. Catal. 235, 295–301 (2005).
Chang, C. et al. Quantitatively unraveling the redox shuttle of spontaneous oxidation/electroreduction of CuOx on silver nanowires using in situ X-ray absorption Spectroscopy. ACS Cent. Sci. 5, 1998–2009 (2019).
Article CAS PubMed PubMed Central Google Scholar
Jung, H. et al. Electrochemical fragmentation of Cu2O nanoparticles enhancing selective C-C coupling from CO2 reduction reaction. J. Am. Chem. Soc. 141, 4624–4633 (2019).
Article CAS PubMed Google Scholar
Poulston, S. et al. Surface oxidation and reduction of CuO and Cu2O studied using XPS and XAES. Surf. Interface Anal. 24, 811–820 (1996).
Lampimäki, M. et al. Oxidation-induced nanostructures on Cu{100}, Cu(Ag) and Ag/Cu{100} studied by photoelectron spectroscopy. Surf. Interface Anal. 39, 359–366 (2007).
Jiang, L. et al. Facet engineering accelerates spillover hydrogenation on highly diluted metal nanocatalysts. Nat. Nanotechnol. 15, 848–853 (2020).
Article ADS CAS PubMed Google Scholar
Liu, K. et al. Cu2O-supported atomically dispersed Pd catalysts for semihydrogenation of terminal alkynes: critical role of oxide supports. CCS Chem. 1, 207–214 (2019).
da Silva, F. P. et al. Synergic effect of copper and palladium for selective hydrogenation of alkynes. Ind. Eng. Chem. Res. 57, 16209–16216 (2018).
Li, L. et al. Accelerating chemo- and regioselective hydrogenation of alkynes over bimetallic nanoparticles in a metal-organic framework. ACS Catal. 10, 7753–7762 (2020).
Ball, M. R. et al. AgPd and CuPd catalysts for selective hydrogenation of acetylene. ACS Catal. 10, 8567–8581 (2020).
Chen, H. et al. Surface and subsurface structures of the Pt-Fe surface alloy on Pt(111). J. Phys. Chem. C. 123, 17225–17231 (2019).
Lundgren, E., Stanka, B., Schmid, M. & Varga, P. Thin films of Co on Pt(111): Strain relaxation and growth. Phys. Rev. B 62, 2843–2851 (2000).
Article ADS CAS Google Scholar
Wang, Z.-J. et al. Surface segregation of PdM (M=Cu, Ag, Au) alloys and its implication to acetylene hydrogenation, DFT-based Monte Carlo simulations. Mater. Today Commun. 28, 102475 (2021).
Mudiyanselage, K. et al. Selective molecular adsorption in sub-nanometer cages of a Cu2O surface oxide. Phys. Chem. Chem. Phys. 15, 10726–10731 (2013).
Article CAS PubMed Google Scholar
Therrien, A. J. et al. An atomic-scale view of single-site Pt catalysis for low-temperature CO oxidation. Nat. Catal. 1, 192–198 (2018).
Liu, W. et al. Selective phenylacetylene hydrogenation on a polymer-supported palladium catalyst monitored by FTIR spectroscopy. ChemCatChem 3, 222–226 (2011).
Madasu, M. & Huang, M. H. Cu2O polyhedra for aryl alkyne homocoupling reactions. Catal. Sci. Technol. 10, 6948–6952 (2020).
Madasu, M. et al. Au-Cu core-shell nanocube-catalyzed click reactions for efficient synthesis of diverse triazoles. Nanoscale 9, 6970–6974 (2017).
Article CAS PubMed Google Scholar
Kresse, G. & Hafner, J. Ab-initio molecular-dynamics for open-shell transition-metals. Phys. Rev. B 47, 558–561 (1993).
Article ADS CAS Google Scholar
Kresse, G. & Hafner, J. Ab initio molecular-dynamics simulation of the liquid-metal-amorphous-semiconductor transition in germanium. Phys. Rev. B 49, 14251–14269 (1994).
Article ADS CAS Google Scholar
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).
Article ADS CAS Google Scholar
Kresse, G. & Furthmüller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mater. Sci. 6, 15–50 (1996).
Perdew, J. P. et al. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Article ADS CAS PubMed Google Scholar
Bendavid, L. I. & Carter, E. A. First-principles predictions of the structure, stability, and photocatalytic potential of Cu2O surfaces. J. Phys. Chem. B 117, 15750–15760 (2013).
Article CAS PubMed Google Scholar
Tang, J. F. et al. Surface segregation and chemical ordering patterns of Ag-Pd nanoalloys: energetic factors, nanoscale effects, and catalytic implication. J. Phys. Chem. C. 118, 27850–27860 (2014).
This work was supported by the National Key Research and Development Program of China (2017YFA0207302), the National Natural Science Foundation of China (21890752, 21731005, 22132004, 2213000173, 22072116, 92045303, 2212100020, 22102027) and the fundamental research funds for central universities (20720180026). N.Z. acknowledges support from the Tencent Foundation through the XPLORER PRIZE. K.L. thanks the China Postdoctoral Science Foundation Project (2020M682081). We also thank the beamline BL14W1 (Shanghai Synchrotron Radiation Facility) for providing beam time.
These authors contributed equally: Kunlong Liu, Lizhi Jiang, Wugen Huang.
State Key Laboratory for Physical Chemistry of Solid Surfaces, Collaborative Innovation Center of Chemistry for Energy Materials, and National & Local Joint Engineering Research Center for Preparation Technology of Nanomaterials, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, 361005, China
Kunlong Liu, Lizhi Jiang, Yue-Jiao Zhang, Chaofa Xu, Ruixuan Qin, Pengxin Liu, Chengyi Hu, Jingjuan Wang, Jian-Feng Li, Gang Fu & Nanfeng Zheng
The Straits Institute of Flexible Electronics (SIFE, Future Technologies), Fujian Normal University, Fuzhou, 350117, China
State Key Laboratory of Catalysis, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Dalian, 116023, China
Wugen Huang & Fan Yang
University of Chinese Academy of Sciences, Beijing, 100049, China
Department of Mechanical Engineering and Manitoba Institute of Materials, University of Manitoba, Winnipeg, MB, R3T 5V6, Canada
School of Physical Science and Technology, ShanghaiTech University, Shanghai, 201210, China
Innovation Laboratory for Sciences and Technologies of Energy Materials of Fujian Province (IKKEM), Xiamen, 361102, China
Gang Fu & Nanfeng Zheng
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
You can also search for this author in PubMed Google Scholar
N.Z. conceived and supervised the research project. K.L., L.J., and W.H. contributed equally to this work. N.Z. and K.L. designed and performed the synthesis and catalytic experiments. G.F. and L.J. designed and performed the DFT calculations. F.Y. and W.H. carried out the STM experiments. G.Z. performed the ACTEM characterizations. J.-F.L and Y.-J.Z. designed and carried out Raman measurements. C.X., R. Q., P.L., C.H, and J.W. were involved in part of the material characterizations. N.Z., G.F., F.Y., K.L., and L.J. prepared the manuscript. All the authors contributed to the overall scientific interpretation.
Correspondence to Fan Yang, Gang Fu or Nanfeng Zheng.
The authors declare no competing interests.
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. Peer reviewer reports are available.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
Liu, K., Jiang, L., Huang, W. et al. Atomic overlayer of permeable microporous cuprous oxide on palladium promotes hydrogenation catalysis. Nat Commun 13, 2597 (2022). https://doi.org/10.1038/s41467-022-30327-2
DOI: https://doi.org/10.1038/s41467-022-30327-2
Anyone you share the following link with will be able to read this content:
Sorry, a shareable link is not currently available for this article.
Provided by the Springer Nature SharedIt content-sharing initiative
By submitting a comment you agree to abide by our Terms and Community Guidelines. If you find something abusive or that does not comply with our terms or guidelines please flag it as inappropriate.
Nature Communications (Nat Commun) ISSN 2041-1723 (online)
Auto Ozone Air Purifier Sign up for the Nature Briefing newsletter — what matters in science, free to your inbox daily.