When Ford brought back the 5.0L block in Coyote form, everyone was excited, but the problem was the original 5.0L was cast iron and the Coyote is aluminum. Darton came up with a solution utilizing its “seal tight technology” with the Ford Modular Seat Tight Sleeve. Related Articles - Driven UTV-ATV Oil - Darton LS Seal Tight Sleeve Kits - Fluidampr Nissan VR38DETT Damper
It’s able to make 1600hp with the stock block, while safely increasing displacement to Voodoo levels. This sleeve makes the block much stronger than the stock aluminum using ductile iron sleeves. In the case of the 5.2L and 5.8L Mod blocks that come with the plasma spray, you can easily bore the block for the Darton sleeve and use any aftermarket piston for high boost safely. Hydraulic Bolt
The kit is available for the Teksid 4.6L, 5.0L, Voodoo 5.2L, 5.4L and 5.8L aluminum blocks. Darton also offers installation in any of these blocks with a lifetime warranty against manufacturers defects. For more boost, more power and better ring seal for a longer lasting engine check out Darton’s Seat Tight sleeve.
For more info: https://dartonsleeves.com/
The specially engineered pan is fabricated from 6061-T6 billet aluminum and features a .250” thick rail, .125” body and a .500” plate to mount the pump.
Aviaid has created a compact dry sump system for the latest generations (3, 4, 5) of the Viper V10 engine. The new package is centered on a 7-stage series 1 pump, which features five oil pan scavenging sections, one pressure section, and one section for scavenging a turbocharger. It can be configured with as many or few sections as desired, while a fuel pump can be driven off the back of the pump.
Graymills’ new Tempest MHF spray washer, which stands for manual, high-pressure, front load, comes in two models.
Increases fuel delivery pressures to 50 to 100 bar on high-output port-injected gasoline engines.
Foggit protects your engine by displacing moisture from metal to prevent corrosion.
The Goliath injector can deliver fuel injection pressure up to 350 on select gasoline direct-injected engines and increase flow by approximately 65 to 70 percent compared to OEM injectors.
Sunnen’s new SH-4000 builds on the 21-year heritage of the successful EC and ML series machines.
Hot Shot’s Secret’s Adrenaline Racing Top Lube reduces wear and scuffing, lubricates upper cylinders and the entire fuel system.
The Stanadyne Goliath performance pump is a high-quality, modular solution addressing the fuel flow limiting factors of stock mechanical fuel pumps when trying to increase the power output of GDI engines.
ACL’s LS Short Groove Main Bearing Set suits the Gen III and IV LS small block engine and is now available.
Motorcycle Clutch Master Cylinder Content for engine professionals and enthusiasts