You have successfully submitted your enquiry. Someone from our company will respond ASAP
Parker is an original equipment manufacturer (OEM) of motion, flow and process control, filtration and sealing technologies, providing precision-engineered solutions for a wide variety of markets, including power generation and renewable energy. Pall Coreless Filter Elements
Parker is an original equipment manufacturer (OEM) of motion, flow and process control, filtration and sealing technologies, providing precision-engineered solutions for a wide variety of markets, including power generation and renewable energy.
The company’s solutions are used in a range of areas, including: Nuclear Coal-fired Gas turbine combined cycle plants Biomass plants Hydroelectric plants Waste-to-energy applications Geothermal Wave tidal Wind Solar Motion and control solutions for application analysis
Parker is a world-leader in motion and control pneumatic, electromechanical, drive and fluidic technologies. The Series XFC Extreme Force Electromechanical Actuator solution offers high durability, long life, minimal maintenance and low operating costs. Parker’s Sentinel™ Portable Purification System has integrated moisture sensor and is compact and lightweight. It is easy to use and requires minimal maintenance. The Multitube® CEMS Umbilical accurately maintains stack gas temperatures while transporting flue gas samples. Parker Olaer ULAC Series Air-Cooled Oil Coolers deliver lightweight, compact, high-performance cooling, driven by AC electric-powered fans. Union Bonnet Severe Service Valves are engineered for use at pressures up to 6,000psig (414bar) and temperatures as high as 1,200°F (649°C). Parker’s Non-Metallic (Fabric) Expansion Joints can handle temperatures up to 2300°F (1260°C). They are constructed with multi-layers for managing thermal expansion, noise reduction, vibration, wind and seismic loads, movement absorption, and system stress relief. With the Parker Velcon TDS® Transformer Dry-out System, a transformer can remain in service while moisture from its insulation is efficiently removed. MaxiGas Series Nitrogen Generators can operate from a standard factory-compressed air supply and deliver 5% down to 10ppm oxygen content, without the need for any additional purification. The Procal 1000 Analyser Control Unit and Software collects data from a range of emissions analysers, enabling the system to display gas concentrations in a normalized basis or in mass units if required. The Parker Velcon VCA Series Real-Time Particulate and Water Analyser uses laser sensing technology to ensure that the fuel loaded into power plant equipment is clean and dry. Parker’s Twin Filter TwinOmatic In-Line Automatic Self-Cleaning Filter Unit is an electric drive, automatic-screen filter designed for assembly in piping alignments with high flow rates for municipal and industrial applications. Parker’s advanced ABEX Jet-Pipe® EHSV (ATEX and FM-certified) technology is less prone to contamination in dirty power generation environments, receiving and passing particles as large as 500mi without malfunction.
Innovative engineering, application analysis, system, sub-system and component selectable levels of integration provide a collaborative development environment, which can result in improved life, reduced risk and greater value.
Parker has a wide range of products, such as central inverters, power conditioning systems, battery-energy storage systems (BESS), air preparation (FRLs), solenoid valves, low-voltage variable-frequency drives (VFDs), electro-hydraulic actuators (EHA) and pneumatic cylinders and valves. Filtration and purification services
Parker’s extensive range of filtration, purification and separation products increase productivity and profitability. From highly engineered compressed air, water and gas filtration systems to process, fuel, oil and hydraulic filtration products and equipment, Parker meets the needs of OEMs, distributors and end-users.
A selection of the solutions includes: Varnish removal systems Static control filter elements Oil purifiers (vacuum dehydrators) Bulk diesel fuel filtration systems Diesel and natural gas coalescers and separators ASME lube oil and liquid fuel pressure vessels Online and offline filtration equipment Portable filter carts Compressed air dryers and filters Interial air filters (pre-filter system for inlet air filters) Cartridge filters and media Air connectors and hose and piping solutions
Parker’s fluidic and pneumatic fittings, tubing, couplings, manifolds, valves, hoses and piping have been engineered to provide reliable, leak-free connections, streamlining development and increasing manufacturing.
Clients can choose from the company’s hose and piping solutions, which include heat-traced tubing bundles (electric and steam), compressed air aluminium and stainless-steel piping systems, hydraulic non-welded piping and tubing systems, and hydraulic and industrial hoses, as well as PTFE and nylon tubing, chemical / liquid fittings and valves (fluoropolymer and thermoplastic), quick disconnect couplings and hose and tube fittings. Hydraulic power units, cylinders, valves and pumps
Parker’s expertise extends to the core motion technology of hydraulics.
The company has market-leading power-dense systems and products that improve industrial and mobile machinery performance.
A sample of these products includes accumulators, electro hydraulic valves, hydraulic power units (HPUs), gear pumps and motors, hydraulic cylinders and valves, and hydraulic pumps and motors, as well as air-cooled and water-cooled oil coolers, and reservoir isolators. Instrumentation solutions to increase accuracy
Parker supplies instrumentation valves, fittings, tubing and manifolds to flow control systems, which help improve accuracy and productivity while reducing risks.
Many of the company’s products comply with pressure equipment directive (PED) quality standards, ASME B31.1 & B31.3 power piping code, and newly enacted fugitive emissions standards.
The product selection includes flow control valves, flow meters and controllers, high-purity valves and fittings, instrumentation regulators and tube and pipe fittings, instrumentation tubing and valves, as well as manifold valves and systems, thermowells, probes and sensors. Comprehensive sealing and shielding devices
Parker’s technically advanced sealing devices are manufactured for tight tolerances, higher temperatures and aggressive chemistries found in modern machines.
The products can fit virtually any sealing and shielding application and cover o-ring seals, fabric expansion joints, gaskets, PTFE seals, rotary and shaft seals, and custom seal kitting (OEM or planned plant outages). On-site gas generation solutions
On-site gas production is a cost-effective, energy-efficient, reliable and safe alternative to traditional gas supplies.
Parker’s iH2 hydrogen generators provide an on-demand, continuous source of hydrogen gas in high volumes, which can be used in a wide range of power generation and renewable energy applications.
For continuous nitrogen gas on demand, the Domnick Hunter line of MaxiGas Nitrogen Gas Generators produces gas from compressed air that can be used in a wide range of power plant applications and multi-banked if required. Condition-based monitoring and diagnostic solutions
Parker offers in-depth expertise in condition monitoring, with a variety of proven and leading-edge products for power applications.
On-site condition monitoring capabilities use the following machine components: Bearings, including radial and thrust bearings Seals and packing rotors, auxiliaries such as lube oil and cooling systems, and more
The company’s product range includes online / offline particle counter detectors, fuel quality and contamination monitoring, oil contamination monitoring and testing field kits, online sensors (oil condition, moisture and metal ferrous debris) and wireless remote monitoring sensors (vibration, pressure, temperature and humidity), as well as acoustic emission (AE) sensors for bearing monitoring. Process water and wastewater treatment solutions
Parker offers significant advantages for process water filtration. From reverse osmosis and ultrafiltration systems for cooling tower blow-down, boiler make-up, and feed water filtration, to gas and oil filtration, Parker has it covered, from intake to outflow.
A wide range of filter cartridges in a variety of materials from stainless steel to melt-blown polypropylene combine with an assortment of vessel types and sizes to reduce both cost and contamination.
The company’s customisable solutions include reverse osmosis filtration systems (Both SWRO & BWRO), automatic self-cleaning filter units, media filters, chemical injection skids, high-flow large diameter filters, multi-cartridge large diameter filter housings and melt-blown high capacity filter cartridges. On-engine solutions for gas turbines and diesel engines
For on-engine solutions, Parker provides unmatched reliability and consistent performance.
The company’s industry-leading, well respected ABEX Jet-Pipe® EHSVs (ATEX and FM certified) and fuel nozzles, as well as the proprietary turbine inlet air cooling spray nozzles, are engineered solutions that keep gas turbines running longer and stronger.
Additional products include: Electrohydraulic servo valves (EHSVs) Flexible metal hose assemblies Fuel control valves and nozzles High temperature metal seals Turbine inlet air cooling nozzles Single and duplex oil filters Fuel filter / water separators High pressure air and gas filters Oil mist eliminators Crankcase ventilation filtration systems Specialist energy professionals
Parker’s specialist team of energy experts is available worldwide to discuss energy needs.
Whether for new build projects, plant outages, modifications or upgrades, Parker experts will work collaboratively to help client’s meet their goals, increasing safety, boosting efficiency, eliminating downtime and reducing operation and maintenance costs by using the latest technology advances and engineered solutions.
With 50,000 employees serving 500,000 customers in almost 50 countries, Parker is literally everywhere you need us to be.
Better combustion for cleaner-burning engines.
Paker Hannifin is a power and energy solutions original equipment manufacturer, providing filtration, sealing, motion, flow and process control technologies.
Parker Hannifin Corporation, the global leader in motion and control technologies, has introduced an advanced cylinder rod coating technology that resists corrosion up to eight times longer than conventional coatings
The Racor Division of Parker Hannifin Corporation, the global leader in motion and control technologies, launched the GreenMAX fuel filter water separator offering the latest Aquabloc® media technology and patented engine return fuel heating system to genset owners and manufacturers.
The Racor Division of Parker Hannifin Corporation, the global leader in motion and control technologies, launched a portable pump and filtration system used for polishing of stored diesel fuel in standby power applications.
Parker Hannifin Corporation, the global leader in motion and control technology, is showcasing its latest wireless solution for condition monitoring at this year's Power-Gen International Conference, 8-10 December, 2015, at the Las Vegas Convention Center.
The Tube Fittings Division (TFD) of Parker Hannifin Corporation, the global leader in motion and control technologies, will be introducing Seal-Lok™ Xtreme at the upcoming Power Gen International show, for power gen applications.
Parker Hannifin Corporation is launching a new portable purifier for applications in power generation environments.
Parker Hannifin Corporation, the global leader in motion and control technologies, has introduced an advanced cylinder rod coating technology that resists corrosion up to eight times longer than conventional coatings.
The engineered system solutions division of Parker Hannifin Corporation, a global leader in motion and control technologies, announces the release of N2 NitroDry, a new compressed air dryer, ideal for use in lube oil systems that use biodegradable or mineral oil.
Parker Hannifin Corporation, a global leader in motion and control technology, will feature its latest energy solutions at this year's Power-Gen Europe conference and expo.
Parker will exhibit at the ASME Turbo Expo, held from 15 to 17 June, in Montreal, Canada.
Parker will exhibit at Power-Gen Europe, held from 9 to 11 June, in Amsterdam, The Netherlands.
Parker will exhibit at Power-Gen India and Central Asia, from 14 to 16 May, in New Delhi, India.
Advanced Atomization Technologies (AA TECH), a joint venture between Parker Aerospace and GE Aviation, has established a worldwide distribution and maintenance network for the fuel nozzles used on GE land and marine engine platforms.
Parker's Global Energy Grid Tie Division has launched a new utility scale PV solar inverter with grid-friendly features. The 890GT-S outdoor central solar inverter is designed for utility-scale PV applications through 2MW.
Parker Hannifin Corporation, the global leader in motion and control technology, is bringing new 'smart cylinders' to the power generation market, featuring its 'absolute position' Intellinder actuation sensor.
Parker Hannifin Corporation, the global leader in motion and control technology, is bringing customers in the power generation industry the next evolution in compressed air piping allowing end users to remote-monitor their compressed air piping systems' critical functions and keep their productivity flowing.
Parker Hannifin Corporation, the global leader in motion and control technology, has combined the extensive fuel filtration expertise of its Racor and Velcon filtration divisions to develop and launch the new CLEANDiesel® product line in a joint marketing strategy.
The Parker Energy Grid Tie Division of Parker Hannifin, the global leader in motion and control technologies, is releasing a new utility-scale power conversion system (PCS) for energy storage, with grid-friendly features at this year's Power Gen international show.
Parker Hannifin Corporation, the global leader in motion and control technology, is bringing customers a low-energy wireless sensor platform for monitoring equipment pressure, temperature and humidity in liquid and gas applications.
The Port Fairy Wave Energy Project, developed by BioPower Systems (BPS), involves the installation and testing of a 250kW bioWAVE pilot demonstration unit in the Southern Ocean, near the coast of Port Fairy, Victoria.
Non-Welded Pipe Connection Systems and Turnkey Services from a single, global source.
Parker’s long-established expertise in system integration is now being translated into turnkey battery containers for energy storage systems.
Producing hydrogen gas from DI water, the new Parker iH2 alkaline cell design offers a cost-effective, energy-efficient, reliable and safe alternative to traditional hydrogen gas supplies such as cylinder or liquid.
The Procal 5000 Ultraviolet (UV) Emissions Analyzer uses absorption spectroscopy to store and analyse the full UV spectrum and calculate gas emission concentrations.
Diesel Filtration Skids (DFS) from Parker Velcon provide fuel conditioning to assure the consistent removal of abrasive particles and damaging water while transporting fuel.
Transair® is a fast, flexible and easy-to-modify piping system for compressed air and industrial water applications.
SensoNODE™ Mobile is an advanced condition monitoring system that combines remote monitoring and Bluetooth® Smart technology to deliver low-cost and simple installation, along with an intuitive user interface for easy operation.
Hycon Filter Elements Power industry news, data and in-depth articles on the global trends driving power generation, renewables and innovation